As part of the increasing portfolio of products we are pleased to introduce Soldark printable PU material for printing dark garments and textiles in full colour. This unique product is compatible with most current Solvent and Eco Solvent Printers including the Mimaki, Mutoh and Roland range. Soldark is thermally transferable white polyurethane film with a unique topcoat that effectively encapsulates the image giving superb washing durability up to 60c. Soldark is applied with a traditional heat press at 150°c -170°c for 15 to 25 seconds, and can be ironed on the reverse side, helping to maintain its soft feel quality. Soldark is not suitable for application to water repellent coated fabrics. Iron on reverse side only.
If you would like to download the Soldark media profile for Versaworks please right click and 'save as' on the correct link below:
Designed to address the problem of sublimation ink migration typically found on items such as football kits and other dyed polyester fabrics. Soldark Printable Sub Block is produced with a barrier layer to prevent the bleeding of ink from the garment into the transfer when applied with a heat press. Simply print and cut the full colour design on the material using a large format solvent/eco-solvent printer/cutter (such as the Roland BN20, SPi or Mimaki CJV series), weed away the excess, use application tape to remove the design from the carrier and apply to your garment using a heat press. Soldark Printable Sub Block is available in rolls 50cm x 25m, suitable for solvent and eco-solvent inks.
Heat resistant application tape - suitable for applying your print & cut graphics to textiles. Available as medium tack (best for detailed designs) or low tack (sometimes preferred for blockier graphics).
The Pro-Roller is perfect for applying application tape to Soldark - or for signage applications. Use with Pro-Roller 12" wide x 50 metre roll of tape.