Application Instruction

Copy image on coated side, without mirror image.

Trim transfer to final shape or size.

Clean surface of product free of dust, grease or oil.

Place decal in cold water for approximately 1 minute, and then slide onto product removing the backing paper.

Remove all remaining air bubbles or wrinkles using a rubber squeegee.

Leave product to set and dry for a least 3 hours.

Increase long term durability by baking in a normal oven at 180 for approximately 5 minutes.

Please do your own test with your own oven.

Do not place into a dishwasher or clean with a scourer in hot water.