The Magic Touch (GB) Ltd - MagiCut Reflective Processing Guidelines

MagiCut Reflective Instructions

Washable up to 40^oC
Cut in Mirror Image
Cool Peel
Please ensure text size is minimum 10mm
After press for 10 seconds at high pressure

TIP: When pressing any fabric always pre-press to avoid moisture

Textile	Temp	Time	Application
Cotton	150^oC	10 secs	For best results press for 10 sec's, allow image tocool before peeling. After peeling cover with a plain piece of paper andre-press for approx 5 sec's at maximum pressure.
Cotton/Polyester (mixture)	150^oC	10 secs
Polyester/Acrylic (mixture)	150^oC	10 secs
Polyester (printed with dye-sub inks)	150^oC	10 secs

Reflective Plotter Settings
Graphtec Plotter - Blade 0.9 (Standard); Pressure 25
NewStar Plotter - Blade 0.3 (Red Cap); Pressure 180g

Nylon and textiles with hydrophobic impregnation are not suitable for heat transfer. We recommend evaluation on test material. For a secure and long-lasting bond of MagiCut products, always keep to specified temperature and pressure conditions.