Application Instruction

1. Print the design onto Tattoo transfer paper (non logo side) in mirror image on selected Colour Laser/LED printer/copier.
   (fill the sheet with as many images as possible)
2. Peel the backing away from the adhesive sheet and position adhesive face up on table.
3. Place printed Tattoo transfer paper face down onto adhesive, press firmly and remove any air or creases.
4. Cut out designs as required with scissors or more precisely with the MagiCut process.
5. Peel away clear film.
6. Position transfer on skin or nails.
7. Cover with wet cloth for approx 20 seconds and press firmly.
8. Remove cloth and slide away transfer, wipe away excess water/moisture.